Regenerating And Recycling Alkaline Etching Solution and Copper Recovery Equipment

Equipment For Regenerating Sodium Persulfate And Recovering Copper From Microetching Waste Solution Using Diamond Anode Plate

The process of "direct electrolysis - regeneration adjustment" is used to regenerate the etching solution and recover copper. In the etching process of circuit boards, the concentration of copper ions in the etching solution will gradually increase, reducing the etching effect. To achieve the best etching effect, it is necessary to keep the copper ions (Cu2+), chloride ions (Cl-) and PH value in the etching solution within a reasonable and stable range. "Direct electrolysis" is the process of depositing high-purity electrolytic copper from alkaline etching waste solution, which reduces the copper ion concentration in the alkaline etching waste solution to 20~40g/L, resulting in its regeneration. "Regeneration adjustment" refers to the process of adding an appropriate amount of etching salt (ammonium chloride), liquid ammonia, and a small amount of alkaline etching additive to the regenerated etching solution with reduced the copper ion concentration to adjust the pH value and Cl- param- eter before it returns to the etching process line for use.

Specifications:

Copper Recovery Equipment

Recycling Alkaline Etching Solution

Regenerating Alkaline Etching Solution

Regenerating And Recycling Alkaline Etching Solution and Copper Recovery Equipment Images